Hey, there! Log in / Register

Truck driver storrows in Dorchester

Storrowed truck on Adams Street in Dorchester

Stuck truck. Photo by BFD.

The Boston Fire Department reports no injuries after a truck driver wedged his truck but good under the Red Line tracks on Adams Street near Lincoln Street around 7:30 a.m.

Truck stuck under the Red Line
Neighborhoods: 
Topics: 


Ad:


Like the job UHub is doing? Consider a contribution. Thanks!

Comments

Not so funny when it happens in Dorchester

up
Voting closed 0

Storrowing will never not be funny, no matter where it is.

At least as long as nobody is hurt and it doesn't take out the Red Line with it, that is.

up
Voting closed 0

Poop is not a laughing matter. Ok, it actually is, but not when it's all over the place.

up
Voting closed 0

I do have concerns whenever I see a bunch of cylindrical objects get damaged...

Plus, I don't see much in the way of placards.

up
Voting closed 0

I give it 7.5/10

There was no tearing off of roofs nor a flip over.

up
Voting closed 0

It's not his fault he's driving some solidly built contraption instead of a tissue-paper-thin box truck ...

up
Voting closed 1

Looks like one of those trucks that clears out sewer pipes. Despite not tipping over, I bet the dollar value of the damage is far greater than any box truck.

up
Voting closed 0

It's nice when uhub can quickly explain why there was an cacophony of sirens in your neighborhood during the morning routine.

up
Voting closed 1

Thoughts of Thirsty Thursday got him like..

up
Voting closed 0

What kind of truck equipment is it?

up
Voting closed 0

I was passing nearby around 10:30 and went to look at what was going on -the road was still closed and the truck about to be towed away. Interestingly, there is a sign that clearly states 13'6" on the bridge and the vacuum truck has a decal on it (not visible on the pictures above) that says 13'6". One of these things had to be a little off.

up
Voting closed 0

Sometimes they forget to adjust the sign after repaving, which could add a few inches to the road surface. I know a trucker this happened to. He said he got out of his truck with a can of spray paint and painted over the "6"" on the sign himself while he waited.

The truck's height could also change a few inches depending on the load it's carrying (although I would hope that the height they put on the sticker is what was measured when the truck was completely unladen, plus a couple inches for a safety margin).

up
Voting closed 0

If the bridge in the truck were the same height would you have driven under it?

up
Voting closed 0

Who’s the company ? Where are their DOT serial numbers on truck?

Hopefully MSP or BPD. Didn’t let them get away not having that.

up
Voting closed 0